Need Help? Call Us Now : (855) 563-5600

The Lowdown on Mini Split Heat Pumps

Mini split heat pumps will make very good retrofit additions to houses with the “non-ducted” heating systems, like radiant panels, hydronic, and space heaters. They can as well be a very good choice for the room additions, where installing or extending ductwork is not possible.

Just like the standard air source heat pumps, the mini splits have two main components: outdoor compressor or condenser, and indoor air handling unit. The conduit that houses the power cable, suction tubing, refrigerant tubing, and condensate drain links outdoor and indoor units.

Today you may have a central air conditioner that does not matter how your house is at present heated, also you do not need to change and tear down the current system. Mini split heat pumps systems are as calm as a breeze, as well as use very less energy than the other systems also they cover your entire house, and have numerous thermostats thus you can control the temperature in the different parts of the house.

The mini split heat pump system is almost invisible. In fact, small holes are situated high on the walls, low to ground, or else anywhere in between. In addition, your installer can give you suggestions about where you can put them to make sure of utmost system efficiency. The rest of this system is installed partially in the crawl space or else basement, and partly outside. There are not any visible features in your house except small holes.

The main benefits of the mini split heat pumps are their size and flexibility for heating and cooling rooms. Many models will have around four-indoor air handling units connected to one outdoor unit. The number will depend on how much cooling or heating is needed for the building or zone. All zones could have their own thermostat. This can save time, energy and money.

Mini-split heat pumps are often simpler to install than some other kinds of space air conditioning systems. For instance, hook up between outdoor and indoor components generally needs only a three-inch hole through wall for the conduit. The majority of the manufacturers of this kind of system will provide a range of lengths of linking conduits. If essential, you can place the outdoor element as far away as fifty feet from the indoor evaporator.

Source by Martin Applebaum

Close Menu